Presentation materials and recordings are available to our Registered Users.
Recorded CCIE Data Center Training Videos
OTV For CCIE Data CenterHide Lessons
Overview and Terminology
Configuration - Multicast Mode and Adjacency Server Mode
Verification and Closing
vPC For CCIE Data Center StudiesShow Lessons
Features Overview and Best Practices
Specifications, Scalability, and Reference Material
Questions and Answers
FabricPath for CCIE Data Center Studies SeriesShow Lessons
Cisco Nexus FabricPath Overview
Building the FabricPath Routing Table
Putting It All Together - Host A to Host B
FabricPath and vPC+ Configuration
Cisco UCS Life of a Packet and Network Troubleshooting Series Show Lessons
End-Host/Switch Mode, Traffic Flow, and Cisco UCS Interfaces
VNTag, HIF to NIF Pinning, Fabric Failover, and Cisco UCS Disjoint Networks
Cisco UCS Unified Ports, Basic Network Troubleshooting, and Following the Path of a Packet
FCoE for CCIE Data Center Studies Series Show Lessons
FCoE Specifications and Initialization Protocol
FCoE NPV Overview
FCIP for CCIE Data Center Studies Series Show Lessons
Fibre Channel over IP (FCIP)
FCIP Basic Configuration Steps
TCP Windows Management and Configuring
Fabric Manager GUI and Additional Topics
Ron Fuller – Ron Fuller, CCIE No. 5851 (Routing and Switching/Storage Networking), has 21+ years of experience in the industry and has held certifications from Novell, HP, Microsoft, ISC2, SNIA, and Cisco. He is the co-author of the CiscoPress title NX-OS and Cisco Nexus Switching. He has had the opportunity to speak at Cisco Live on VDCs, NX-OS Multicast, NX-OS Software and Hardware Architecture and general design.
Robert Whitaker – CCIE Data Center Robert Whitaker is based in the RTP, North Carolina office as a Customer Support Engineer for the Server Virtualization TAC team. Robert's areas of expertise include UCS networking and troubleshooting the Nexus 1000v. Robert spoke at Cisco Live 2013 in Orlando and was recognized with a distinguished speaker award.
Amanda Hunt – Amanda Hunt holds a CCIE Datacenter and is working as a lead with the Datacenter Switching TAC Team based in RTP North Carolina. Amanda has extensive experience with datacenter technologies and has published Technotes on Cisco.com.
Al Bryant – Al Bryant is a CCIE Data Center working out of RTP, North Carolina. He started out as a Lab Advocate helping setup lab recreates and eventually transitioned into TAC. Al has been a member of the Data Center Switching TAC team for nearly 3 years. His focus is on Data Center technologies including OTV and FabricPath. He has several documents published on Cisco.com’s TechNotes.