9 Replies Latest reply: Sep 13, 2009 1:32 PM by Cristian Matei - CCIEx2 RSS

    Can/should you use 0.0.0.0 255.255.255.255 area 0 on OSPF ?

    John
      Hi
      In the jpg attached, at the bottom of the jpg you can see
      OSPF 3
      0.0.0.0 255.255.255.255 area 0
      I would have thought it should be
      OSPF 3
      10.1.13.2 0.0.0.0 area 0
      10.1.3.3 0.0.0.0 area 0
      Can someone explain if the command 0.0.0.0 255.255.255.255 is correct or incorrect and why please. I came across it in a practise exam, i thought it was wrong but it never mentioned it in the answer.
      Regards
      John