12 Replies Latest reply: Sep 17, 2014 6:23 PM by jheinrichs79 RSS

    System received a Software forced crash

    jheinrichs79

      I am having issues with one of my routers in my home lab. Searching online it looked like it was a corrupt IOS image.

       

      I've booted in Rommon and told the router to download a IOS image using TFTP.

      The router went through the paces and it formated and copied the file to flash drive.

      During the copy it says the checksum was correct.. Ie the images wasn't corrupted during the copy.

       

      using the dir flash: command I verified that the image is on the flash card. The .bin file was the only file on the flash drive.

       

      After verifying the file I entered the command: boot flash:c1841-ipbasek-mz.124-11.T.bin

       

      Please see below for the output:

      (still getting the "System received a Software Forced crash")

       

      rommon 11 > boot flash:c1841-ipbasek9-mz.124-11.T.bin

      program load complete, entry point: 0x8000f000, size: 0xcb80

      program load complete, entry point: 0x8000f000, size: 0x1197330

      Error : compressed image checksum is incorrect 0x632AE777

              Expected a checksum of 0xC39AE777

       

      *** System received a Software forced crash ***

      signal= 0x17, code= 0x5, context= 0x80014b00

      PC = 0x8000f0d4, Cause = 0x20, Status Reg = 0x3041e803

       

      System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

      Technical Support: http://www.cisco.com/techsupport

      Copyright (c) 2006 by cisco Systems, Inc.

      PLD version 0x10

      GIO ASIC version 0x127

      c1841 platform with 196608 Kbytes of main memory

      Main memory is configured to 64 bit mode with parity disabled

       

       

      Readonly ROMMON initialized

      program load complete, entry point: 0x8000f000, size: 0xcb80

      program load complete, entry point: 0x8000f000, size: 0xcb80

       

      program load complete, entry point: 0x8000f000, size: 0x1197330

       

      Error : compressed image checksum is incorrect 0x631AE777

              Expected a checksum of 0xC39AE777

       

      *** System received a Software forced crash ***

      signal= 0x17, code= 0x5, context= 0x80014b00

      PC = 0x8000f0d4, Cause = 0x20, Status Reg = 0x3041e803

       

      System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

      Technical Support: http://www.cisco.com/techsupport

      Copyright (c) 2006 by cisco Systems, Inc.

      PLD version 0x10

      GIO ASIC version 0x127

      c1841 platform with 196608 Kbytes of main memory

      Main memory is configured to 64 bit mode with parity disabled

       

       

      Readonly ROMMON initialized

      program load complete, entry point: 0x8000f000, size: 0xcb80

      program load complete, entry point: 0x8000f000, size: 0xcb80