5 Replies Latest reply: Nov 2, 2013 1:42 PM by Aref - CCIE #62163 (Security) / CCNPx2 (R&S - Security) / Network+ / Security+ RSS

    EIGRP show ip protocols

    linuda

      Hi guys, I started my studies for ccnp with CCNP ROUTE 642-902 Official Certification Guide, in the Eigrp review I find an errore with the show ip protocols command. The my question is: is corrected those that was wrote on the book ?

       

      Figura1.png

       

      R2#show ip protocols

      Routing Protocol is “eigrp 1”

      Outgoing update filter list for all interfaces is not set

      Incoming update filter list for all interfaces is not set

      Default networks flagged in outgoing updates

      Default networks accepted from incoming updates

      EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0

      EIGRP maximum hopcount 100

      EIGRP maximum metric variance 1

      Redistributing: eigrp 1

      EIGRP NSF-aware route hold timer is 240s

      Automatic network summarization is in effect

      Maximum path: 4

      Routing for Networks:

      10.1.2.2/32

      10.1.0.0/19

      Routing Information Sources:

      Gateway

      Distance

      Last Update

      10.1.12.1 90 00:19:36

      10.1.23.1 90 00:19:36

      Distance: internal 90 external 170

       

      In the section "Routing for Networks" the network 10.1.2.2/32 and 10.1.0.0/19 shoud be 10.1.2.2/25 and 10.1.0.0/30, correct ?

       

      Thanks for your answer .