Skip navigation
Cisco Learning Home > Certifications > Security (CCNA Security) > Discussions

_Communities

3537 Views 1 Reply Latest reply: Mar 31, 2009 11:53 PM by Adrian Soh RSS

Currently Being Moderated

GNS3 router flash adding problem

Mar 31, 2009 10:44 PM

sudath 8 posts since
Jun 30, 2008

CAN ANYONE TELL ME HOW TO ADD SOME FLASH MEMORY TO A ROUTER IN GNS 3.02* *

 

I USED RIGHT CLICK ON ROUTER >CONFIGURE>gave 64 mb for slot 0

 

 

ans 20mb for slot 1

 

 

but when router boots up it says 0k in flash slot0

 

 

there's another question

 

 

how to instruct win xp to use a certain NIC for internet browsing without trying to use the loopback NIC or any other NIC in the computer because i always have to disable other NICs as well as loopback NIC s when browsing internet.

 

 

  • Adrian Soh 228 posts since
    Jan 4, 2009
    Currently Being Moderated
    1. Mar 31, 2009 11:53 PM (in response to sudath)
    Re: GNS3 router flash adding problem

     

    Firstly, why do you need to add flash memory to a router in GNS3? You can use SDM without adding it to the router's flash memory. Check you are using a SDM capable IOS. If you are not sure, have a look at the Cisco Feature Set Navigator.

     

     

    Regarding your second question, alter your "routes" on your xp machine. How?

     

     

    Command Line > type "route print"

     

     

    and modify appropriately. Hope this helps.

     

     

    Thanks

    Adrian

     

     

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)