2 Replies Latest reply: May 1, 2012 7:47 PM by milan RSS

    Switch IOS for IPv6

    milan

      Hi guys,

      When deploying IPv6 do we need to upgrade 2950, 2960 & 3550 switches' firmware. 2950 & 3550 both EOS.

       

      Is there any recomended IOS for IPv6 for switches..

        • 1. Re: Switch IOS for IPv6
          BIGEVIL

          The 2950/60 3550, it does nott care if it carries IPv4, v6 or whatever else type of traffic when working at L2. You won't be able to have an IPv6 address for mgmt on the 2950 - BTW.

           

          The 3350 is limited on what IPv6 it can run. 12.2(50) would  work. It is just software, no ASIC support.

           

          HTH

          • 2. Re: Switch IOS for IPv6
            milan

            Thats fine, I understood. Whether we use IPv4 or v6; its L3. Switch work on L2 and its ethernet. so no need to bother.

             

            What about L3 switch, when using IPv6 HSRP do we need to upgrade. Im using 12.2(35)SE5 for 3560 switch with IPv4 HSRP.  When I check in fn, seems ok.