web server should be on by default; assign IP address and on PC open web browser and type in IP address of web server.
DNS needs some configs; Name to IP address must be added in DNs window of server.
if I find example, I will upload it; the best to see working example.
Yes, I have two wonderful examples under my documents. Links below. Just click on the WWW server and DNS server to see how they are configured.
I also have two PT activities, so after you play around with the .PKT labs you can try your hand at configuring the labs with the .PKA.
Please let me know if you have any questions.
Hope this helps.
You should use GNS3, packet tracer is very limited and only good enough for CCNA i think, even then there are limitations.
Open the PT .pkt file. Click on the ISP router and then click the tab for CLI. You can then view the configuration of the router. In the PT .pka file you only have access to the devices you are required to configure.
Practice with the .pkt file first. You can viw ALL the different configuratioins. Feel free to change them and make your own. When you think you are ready, take the TEST with the .pka lab.
Best of luck.