Skip navigation
Login   |   Register
Cisco Learning Home > Certifications > CCIE Service Provider > Discussions

_Communities

3791 Views 4 Replies Latest reply: Nov 24, 2011 3:03 AM by Leon van Dongen RSS

Currently Being Moderated

CCIE SP v3.0 Sample Lab - Part 1 of 7

May 17, 2011 2:00 AM

Vincent Zhou 47 posts since
Nov 20, 2008

Dear Candidate,

 

This document is part of the “practice lab” series covering core concepts and configuration/troubleshooting tips and techniques for candidates preparing for the new SP v3.0 Lab exam. The content covered in this document is drafted to give readers a comprehensive hands-on overview of the new lab exam content.

 

I hope this sample lab is useful during your preparation, and will help you succeed in achieving the new CCIE SP certification.

All the best!

 

Regards,
Vincent

  • anazarenko 28 posts since
    Apr 24, 2010
    Currently Being Moderated
    1. May 22, 2011 10:36 AM (in response to Vincent Zhou)
    Re: CCIE SP v3.0 Sample Lab - Part 1 of 7

    *Configure IBGP IPv4/IPv6 unicast between R7 and R9

    *Configure EBGP IPv4/IPv6 unicast between R6 and R9

    *Ensure Loopback0 IPV4/IPv6 network is seen as BGP routes

    and they can ping each other

     

     

    Doesn't it specify that iBGP neighbor loopbacks must be reachable via BGP?

    The wording is very ambiguous.

    Join this discussion now: Login / Register
  • Martin 13,889 posts since
    Jan 16, 2009
    Currently Being Moderated
    2. May 23, 2011 8:56 AM (in response to Vincent Zhou)
    Re: CCIE SP v3.0 Sample Lab - Part 1 of 7

    what IS-IS doing in there ? I think it is gone !

    Join this discussion now: Login / Register
  • haji 31 posts since
    Nov 9, 2010
    Currently Being Moderated
    3. Nov 24, 2011 2:43 AM (in response to Vincent Zhou)
    Re: CCIE SP v3.0 Sample Lab - Part 1 of 7

    is-type level-1 command must be under

     

    RP/0/0/CPU0:router(config-isis)#

     

    or

     

    RP/0/0/CPU0:router(config-isis-af)#

     

    ?

    Join this discussion now: Login / Register
  • Leon van Dongen 28 posts since
    Sep 26, 2010
    Currently Being Moderated
    4. Nov 24, 2011 3:03 AM (in response to haji)
    Re: CCIE SP v3.0 Sample Lab - Part 1 of 7

    Hi the is-type command is under the global isis configuration, you only define it per instance and not per address-family.

     

    "For Cisco IOS XR software software, each IS-IS instance can support either a single Level 1 or Level 2 area, or one of each. By default, all IS-IS instances automatically support Level 1 and Level 2 routing."

     

    router isis abc
    set-overload-bit on-startup 180
    >is-type level-2-only
    net 47.0002.0000.0000.0001.00
    nsf cisco
    log adjacency changes
    lsp-gen-interval maximum-wait 5000 initial-wait 1 secondary-wait 50
    lsp-refresh-interval 65000
    max-lsp-lifetime 65535
    address-family ipv4 unicast
       metric-style wide
       metric-style wide level 2
       ispf level 2
       spf-interval maximum-wait 1000 initial-wait 1 secondary-wait 50

    Join this discussion now: Login / Register

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)