I finish completing the Tshoot topology on GNS3 and I post a Zip file. So now we have a working Lab, so let broke the lab and start troubleshooting. I would be posting a brooking config in couple of day, but before that I would like people to test the lab and see if everything is working fine and if there is any technology that anybody wants to add to the lab.
Message was edited to remove self-promotion by:
Cisco Learning Network Moderator
thanks, will check it out later.
I just noticed in the zip that I post on the website, there is an small problem. Client 1 and Client 2 were able to grab an IP address from the DHCP server. Now the Client is able to ping both DSW1 and DSW2 vlan 10 ip , but not able to ping the Virtual IP for HSRP. I know what the problem is, but I'm going to leave it like for troubleshooting learning pourpose.
where do I down load the zip file? can't find it on the site.