2 Replies Latest reply: Dec 28, 2010 12:42 AM by rocky RSS

    Power status and show module in 12.4(15)T5

    rocky

      Hello Friends,

       

      please tell me that how we can check  show module and show power supply status in below mentioend IOS software?

       

      ________________________________________________________________________________________________

      TECOM-CORE-RR-C7K2-1#sh ver
      Cisco IOS Software, 7200 Software (C7200P-ADVIPSERVICESK9-M), Version 12.4(15)T5, RELEASE SOFTWARE (fc4)
      Technical Support: http://www.cisco.com/techsupport
      Copyright (c) 1986-2008 by Cisco Systems, Inc.
      Compiled Wed 30-Apr-08 22:52 by prod_rel_team

      ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)

      TECOM-CORE-RR-C7K2-1 uptime is 2 years, 9 weeks, 6 days, 6 hours, 22 minutes
      System returned to ROM by power-on
      System restarted at 02:37:07 UAE Sat Oct 18 2008
      System image file is "disk2:c7200p-advipservicesk9-mz.124-15.T5.bin"


      This product contains cryptographic features and is subject to United
      States and local country laws governing import, export, transfer and
      use. Delivery of Cisco cryptographic products does not imply
      third-party authority to import, export, distribute or use encryption.
      Importers, exporters, distributors and users are responsible for
      compliance with U.S. and local country laws. By using this product you
      agree to comply with applicable laws and regulations. If you are unable
      to comply with U.S. and local laws, return this product immediately.

      A summary of U.S. laws governing Cisco cryptographic products may be found at:
      http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

      If you require further assistance please contact us by sending email to
      export@cisco.com.

      Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
      Processor board ID 21295911
      MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
      6 slot VXR midplane, Version 2.0

      Last reset from power-on

      PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
      Current configuration on bus mb1 has a total of 200 bandwidth points.
      This configuration is within the PCI bus capacity and is supported.

      PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
      Current configuration on bus mb2 has a total of 0 bandwidth points.
      This configuration is within the PCI bus capacity and is supported.

      Please refer to the following document "Cisco 7200 Series Port Adaptor
      Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
      for c7200 bandwidth points oversubscription and usage guidelines.


      3 FastEthernet interfaces
      3 Gigabit Ethernet interfaces
      2045K bytes of NVRAM.

      20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
      250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
      65536K bytes of Flash internal SIMM (Sector size 512K).
      Configuration register is 0x2102