Sorry about that. The instructions for using UWM to change the host IP address is not valid for 1.6. Follow these steps https://learningnetwork.cisco.com/docs/DOC-31773#jive_content_id_No_DHCP_Address_and_is_Licensed__UnLicensed_VIRL_13_and…
Thank you for the reply and for updating the page. I followed the "No DHCP/Licensed" section even though I had a DHCP address. I ended up with no Internet access but I am not sure if that is a problem with the procedure or my "VMware Fusion". I ended up solving my problem by adding a fixed address in my VMware dhcp.conf file.