2 Replies Latest reply: Oct 8, 2019 2:09 PM by Derik RSS

    Virl 1.5 ; Salt Status Failing

    Derik

      I've tried these suggestions.

      Please review and apply the appropriate Salt Masters listed on the following post:ATTENTION: Salt Masters Update (Licensing)

       

      If that doesn't work, let's try changing the MTU size. Please refer to the following thread and solution: Failure to activate new instance of VIRL

       

       

      However, still getting the folllowing;    any other ideas out there?

       

      Status check is failing. It may be temporary and resolve itself after a few minutes, or else should be fixed by resetting the configuration.

      Host: vsm-us-51.virl.info

      DNS
      Ping
      Port 4505
      Port 4506
      Connect

      Host: vsm-us-52.virl.info

      DNS
      Ping
      Port 4505
      Port 4506
      Connect

      Host: vsm-us-53.virl.info

      DNS
      Ping
      Port 4505
      Port 4506
      Connect

      Host: vsm-us-54.virl.info

      DNS
      Ping
      Port 4505
      Port 4506
      Connect
        • 1. Re: Virl 1.5 ; Salt Status Failing
          Derik

          Salt ID and domain match what I was provided;

          Tried all possible salt masters

          Minion private RSA key from my PEM file is correct.

           

          Hows never to expire.

          Created

          2018-02-22 17:49:24

          Expires

          never

           

          It's been a couple months since I've used the system.  No issues then.  Other than I was having connect issues to all masters but  host  vsm-us-54.virl.info;    And had to put that host first in the list to get the system working again.

           

          But now all are failing.  Any help would be appreciated.

          • 2. Re: Virl 1.5 ; Salt Status Failing
            Derik

            Figured it out.   Remembered that I still had the script   stl_tstr.sh

             

            Ran the script ;   some of the EU servers worked,  but none of the US servers worked.

             

            Just using the two EU servers that processed the key correctly.