2 Replies Latest reply: Jul 10, 2019 11:51 AM by Damian Deppeler RSS

    ASR9K virtual router came up without a lot of interfaces that are present in the topology.

    Damian Deppeler


      Any time I run an ASR9Kv its comes up without a lot of interfaces that are presents in the topology.  Somebody has or had the same problem?



      hostname ASR9K-1

      telnet vrf default ipv4 server max-servers 10

      domain name nepal.logicalis.com

      username nepal

      group root-lr

      group cisco-support

      secret 5 $1$PWKk$cxp4yD2ol2GjTdjnIbfns.


      line default

      transport input ssh telnet



      service active

      contact smart-licensing

      profile CiscoTAC-1


        destination transport-method http



      interface MgmtEth0/RP0/CPU0/0

      ipv4 address


      interface GigabitEthernet0/0/0/0



      router static

      address-family ipv4 unicast



      ssh server v2



      RP/0/RP0/CPU0:ASR9K-1#sh ip inter bri

      Wed Jun 26 18:22:21.974 UTC



      Interface                      IP-Address      Status          Protocol Vrf-Name

      MgmtEth0/RP0/CPU0/0     Up              Up       default

      GigabitEthernet0/0/0/0         unassigned      Shutdown        Down     default


      Like you could see, in the topology the ASR9K-1 router has three interfaces (G0/0/0/0, G0/0/0/1 and G0/0/0/2)  in addition to management interface, but the router comes up with only one interface (G 0/0/0/0).


      Thanks a lot.