3 Replies Latest reply: May 29, 2019 12:55 PM by Carlos RSS

    Which routing protocols are on ICND1 exam?

    Carlos

      I am using Boson to study for the ICND1 exam and they have questions with OSPF and EIGRP, but I dont see these protocol on the exam content just RIP.

      Does anyone know if they are in the exam?

         
        • 1. Re: Which routing protocols are on ICND1 exam?
          Ing_Percy

          Hi!

           

          On ICND1 topics

           

          Routing Fundamentals

          Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)


          See:ICND1 Exam Topics


          • 2. Re: Which routing protocols are on ICND1 exam?
            Martin

            it is probably other way around,  RIP is on ICND1 and all (including RIP) can be on ICND2.  But of course, always must check with Cisco Exam topic under CCENT/CCNA

            \

            ICND1

            3.5 Compare and contrast static routing and dynamic routing

            3.6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing

            • 3.6.a Default route
            • 3.6.b Network route
            • 3.6.c Host route
            • 3.6.d Floating static

            3.7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

             

            ICND2

             

            2.2 Compare and contrast distance vector and link-state routing protocols

            2.3 Compare and contrast interior and exterior routing protocols

            2.4 Configure, verify, and troubleshoot single area and multiarea OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

            2.5 Configure, verify, and troubleshoot single area and multiarea OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

            2.6 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

            2.7 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

             

            Notice RIP is not spell out here but it falls into 2.2 as it is distance vector. which my guess is RIP configuration is not tested on part2 but it is on 1

             

            Good luck!

            • 3. Re: Which routing protocols are on ICND1 exam?
              Carlos

              Thanks!