I am in process of configuring two vpn tunnels on ASA Firewall.
By the way all interface's security level is 0.
When i configure first tunnel between ASA0 and ASA1
Tunnel is up.
But when i configure second tunnel between ASA0 and ASA2
Tunnel is not up on the ASA0
For ASA 2 side
For ASA0 VPN parameters:
2 tunnel configurations uses same crypto map.
2 tunnel configurations uses different policy
2 tunnel configurations uses different transform set
2 tunnel configurations uses different crypto sequence number.
How to make second tunnel UP.
Thank you for your time.
I found the solution.
Before ping from host 192.168.1.2 to 192.168.3.2 to make tunnel up,I found that i had to ping ASA2 from ASA0.
Once ASA0 and ASA2 ping is success, i ping from host 192.168.1.2 to 192.168.3.2 and then, second tunnel is up. First and second tunnel both up.