6 Replies Latest reply: May 5, 2019 4:03 AM by daniel1820815 RSS

    NPDESI - Problem with NETCONF LAB 10.10 Step 9

    Hubert Lehnigk

      Hello Team,

       

      I try to fullfill the Challange 10.10 with Netconf.

      The Python script should configure with help of ncclient an Interface E2/6.

      After my first fail I entered the solution but even with that it reports an error as:

       

      " Missing VLAN or interface configurations"

       

      What I found is that the output between the solution and my script differs a littel bit.

       

      My Script answers with:

       

      "python nc_config_interface.py

      <?xml version="1.0" encoding="ISO-8859-1"?>

      <rpc-reply xmlns:if="http://www.cisco.com/nxos:1.0:if_manager" xmlns:nfcli="http://www.cisco.com/nxos:1.0:nfcli" xmlns:nxos="http://www.cisco.com/nxos:1.0" xmlns:vlan_mgr_cli="http://www.cisco.com/nxos:1.0:vlan_mgr_cli" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:15587fb6-4db8-11e6-b064-080027cee472">

        <ok/>

      </rpc-reply>"

       

      The attached Picture shows the output from my lab. Maybe the Grade Script compares this and believe it is not yet correct.

      XMLrespond-myLab.PNG

       

       

      Does anybody has finished this lab with success?