0 Replies Latest reply: Apr 2, 2018 3:56 AM by master RSS

    Cisco port channel with mellanox MLAG interface ospf configuration



      I have two MLNX switches in MLAG configuration and one interface from each MLNX switches is connected to cisco L3 switch in mlag-port channel with two ten gig ports in trunk. My question is how to configure ospf configuration between MLNX switches and Cisco on a MLAG-port channel. I have two vlan that are allowed on mlag-port channel trunk, one for management network and other one for a transit network to carry all networks on MLNX over OSPF. Appreciate your help