1 Reply Latest reply: Jan 8, 2013 8:26 PM by chacha2me RSS

    wireless bridge

    chacha2me

      This is what I have:

       

                                                R3

                                                 |

      R1 <-> wireless bridge <-> R2 <-> switch2 <-> Internal network(10.10.10.0/24)

       

      R2 has serial0 connecting to R3 and fa0 connecting to switch2

       

      This is what I want it to be:

      R3

        |

      R1 <-> wireless bridge <-> R2 <-> switch2 <-> Internal network(10.10.10.0/24)

       

      R1 serial0 will be connecting to R3

       

      Can users in R1 get to the internal network through the wireless? I am not sure but I don't think they can because there is no route.

        • 1. Re: wireless bridge
          chacha2me

          Sorry, actually this is the correct configuration

          Existing:

                                                                 PC2<->R3<->R2

                                                                                            |

          Switch0 <-> wireless bridge<->wireless bridge<->R1<->switch1<->PC1

            |

          PC0

           

          Desire configuration:

            PC2<->R3<->R2

                          |

                      R1<->Switch0 <-> wireless bridge<->wireless bridge<->switch1<->PC1

                      |

                    PC0

           

          In the existing configuration, PC2 can access PC1 without any problem. If I move to the desire configuration, can PC2 still access PC1?

          PC0 and PC1 are on the same subnet, 10.10.10.0/24

           

          Thanks