i am writing again boz it is possible picture will not open here.
I am trying to use SDM with GNS3 but problem is that whenever i try to access my router through SDM so its hang up on the status pop-up with the following Msg.
" Please wait while SDM is loading the current configuration from your router ".
then show half prograss bar then
" Parsing router's running config "
please guide me how i can solve this problem
This may be of assitance.. It's a video explaining how to run SDM with GNS3...This is compressed in a RAR file so you will need to "unzip" it.. If you need a utility try 7zip http://www.7-zip.org/ It's free/open-source and awesome! Next you will need to install the Microsoft Loopback Adapter.. this varies by Windows Version (and even Service Pack) so you may need to Google! Anyway, the video seems to cover it all!
Hope this helps!
i too have the exact same problem with the exact same message.i think it may be because of old IOS.
can you tell me where to find latest 12.4 ios for 2600? and how to find which ios supports SDM
now there's another problem when trying to open a .net file in gns3 it says dynamips error could not connect to server
please give me a solution
Try right-clicking on GNS3 and selecting "RUN AS ADMINISTRATOR". I am assuming that you are running Vista! If this does not work then please post the following information.
Operating System (Windows Vista Home Premium 32 Bit)
Java Version and Build (Java 6 Build 0)
GNS3 Version (0.6)
SDM Version (2.5)
Browser Version (FireFox 3.0.7)
The above is what I am running and I got it working (with some help).. Here is a link to a doc that I posted for those starting the GNS3 path! Pay special attention to the link under SDM on GNS3!!!!!!!!
GNS3 START HERE
GNS3 - START HERE!RUN SDM WITH GNS3
http://www.gns3-labs.com/2008/07/10/video-configure-sdm-in-gns3/TROUBLESHOOTING SDM AND CCP ON VISTA WITH GNS3
I hope this helps And I hope it also helps the originator of this thread!!!
i had a tcp ip crash, may be because of bitdefender uncompatible with windows dotnet3.5 update and windows fire wall services were not responding and while i was trying care lessly and angryly i had to install windows again.
there was another computer but in it java says child not found and dont even show the sdm home page
may be ishould try java 6 as you mentioned .
iwas using latest java 6 update 13
gns 3.06 gns 3.02
sdm 2.3 sdm2.5
i'm a student living in sri lanka & i would like to buy some used really cheap (but in good working condition) cisco routers, switches, access points for my CCNA exam & some wireless laptops . but i don't like to take the risk of internet payments before getting the goods on hand.because i have only few money left in my bank account which i have to spend wisely for my education, to servive untill i get a job. do you have any one you know well in sri lanka ,who you can send the routers and then i can visit him, get the router and give him the agreed money on hand? if you can arrange that type of payment method please send me a price list. please give me a solution may god bless you
CAN ANYONE TELL ME HOW TO ADD SOME FLASH MEMORY TO A ROUTER IN GNS 3.02
I USED RIGHT CLICK ON ROUTER >CONFIGURE>gave 64 mb for slot 0
ans 20mb for slot 1
but when router boots up it says 0k in flash slot0
there's another question
how to instruct win xp to use a certain NIC for internet browsing without trying to use the loopback NIC or any other NIC in the computer because i always have to disable other NICs as well as loopback NIC s when browsing internet.