7 Replies Latest reply: Jan 13, 2011 6:04 AM by Jared RSS

    AP's not downloading new  7.0.98.0 code

    Crackers

      Hi all,

       

      I have a issue since moving to the new 7.0.98.0 version of code.  The ap's are no longer associating to the wlc.  The go through the normal proccess but it fails when tying to download the IOS to the AP  Please see logs below:

       

      *spamReceiveTask: Jan 12 10:25:41.642: %CAPWAP-3-INVALID_STATE_EVENT: capwap_ac_sm.c:742 Invalid AP event (13) and state (5) combination
      *spamReceiveTask: Jan 12 10:25:38.642: %CAPWAP-3-INVALID_STATE_EVENT: capwap_ac_sm.c:742 Invalid AP event (13) and state (5) combination
      *spamReceiveTask: Jan 12 10:25:11.673: %CAPWAP-3-TX_ERR: capwap_ac_sm.c:3924 Failed to transmit image data request to AP 00:1f:9d:20:88:40
      *spamReceiveTask: Jan 12 10:25:11.673: %CAPWAP-3-ENCODE_ERR: capwap_ac_sm.c:2333 Failed to encode Image data request to AP 00:1f:9d:20:88:40
      *spamReceiveTask: Jan 12 10:25:11.673: %CAPWAP-3-IMAGE_DOWNLOAD_ERR3: capwap_ac_platform.c:781 Refusing image download request from AP - unable to open image file /bsn/ap//c1240
      *apfReceiveTask: Jan 12 10:25:11.661: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
      *spamReceiveTask: Jan 12 10:25:08.644: %CAPWAP-3-TX_ERR: capwap_ac_sm.c:3924 Failed to transmit image data request to AP

       

      The controler is  a NME-AIR-WLC12-K9 and the AP's are AIR-AP1242AG-E-K9

       

      It just seems to be continually attempting to download, but it never completes.  I have used this code on a 4402 with the same model AP's and it is working fine so am a bit stuck why it refusing the image download request.  It was working fine before the code change.

       

      Any help would be much appreciated!!

       

      Regards

       

      Rob