Understating Cisco IOS v15 Licenses

    Understating Cisco IOS v15 Licenses

     

    Prior to IOS 15 , we used to have 8 IOS images Types (Feature set) , by the way it was 12 before it comes 8.

     

    any router was coming with IB Base  feature set and according to your company needs you can go for advance feature set and replace the IOS , check the below pic :

    1.jpg

    The following Picture explain each one and what features you will gain once you run that feature set :

     

    2.jpg

    Now with IOS 15 it become 4 instead of 8  Feature sets and  these 4 Features set comes in one single IOS image ,now days we use the term (technology package ) when referring to feature set.

     

     

    What are the ISO v15 Feature sets (technology package) types we have now days with ISR G2:

     

    1. IP Base (ipbaseK9)come and running with any new ISR G2 routers (1900,2900,3900 Series) , its entry level for Cisco IOS functionality
    2. DATA (dataK9)support MPLS.ATM. Multiprotocol support
    3. Unified Commuincations (ucK9) support VOIP & IP Telephony
    4. Security (securityK9) support Cisco IOS Firewall , IPS , IPsec , 3DES, VPN

     

    The following picture summarize these Feature sets (technology package):

     

    3.jpg

     

     

    ISR Integrated Service Router G2 come with IPbase and to  run the other three technology package we need to understand the concept of licenses which similar to ASA firewalls licenses by the way .

     

    Licenses has two types:

     

    Evaluation (Temporary) License

    which mean will be available with all functionality for trial period would be 60 days

     

    Permanent License

    which mean you must get new license from cisco to run it for ever

     

    Any License has Status :

     

    any type could had one of two status

     

    • Active, In Use
    • Inactive

     

     

    Normally your Universal image come with ipbasek9 built -in with the following type and status 

     

    License Type: Permanent

     

    License State: Active, In Use

     

     

    So if we want to run one of the remaining three feature sets  ,Licenses need to be activate it so you can use it whatever you will use it as Permanent or Evaluation.

     

    Cisco give you the ability to activate the remaining three feature sets   for Evaluation but if you like to use any of them Permanently you will need to get license from cisco.

     

    Note 1 : The IP Base license is a prerequisite for installing the Data, Security, and Unified Communications license.

     

    Note 2 : if you want to run all feature set you will need license for each as the pic below :

    4.jpg

     

     

    How to get License from Cisco and how to install it in my Router ?

    Complete the following steps to permanently activate a software package or feature on the router:

     

    1- Purchase the software package or feature that you want to install. You receive a PAK with your purchase.

     

    What is Product authorization key (PAK):

     

    The PAK is provided to you when you order or purchase the right to use a feature set for a particular platform.

    The PAK serves as a receipt and is used as part of the process to obtain a license

     

     

    2-Get the license file using one of these options:

     

    Option 1 -Cisco License Manager, which is a free software application available at http://www.cisco.com/go/clm.

     

    Option 2 -cisco license registration portal  www.cisco.com/go/license

     

    on any of these options what you will do is  Convert the PAK to a license by entering the PAK and the unique device identifier (UDI) into the CLM or Cisco Product License Registration portal

     

    Note : UDI  has two main components: the PID and the serial

     

    What is the unique device identifier (UDI)?

     

    A. The UDI is a combination of the product id (PID), the serial number, and the hardware version. The UDI is printed on a label that is located on the back of every switch and also viewable from the command-line interface (CLI) (show license UDI) and management tools (using Simple Network Management Protocol [SNMP]). Only the PID and serial number are used for license creation

     

     

    To know what is your UDI , type show license udi as the following pic showing you :

    5.png

     

     

    Also show version command will display the UDI

     

    This information is also present on a pull-out label tray found on the device. See the following two pictures :

    6.jpg

    7.jpg

     

    After entering the appropriate information, you will receive an e-mail containing the license information that you can use to install the license

     

    • Copy the license file received from the Cisco Product License Registration portal to the appropriate file system on the device.

    or

    • Click the Install button on the web page.

     

     

    What is the License Format ?

     

    The license is in the form of a file with a .lic extension

     

    A Software Activation License is an XML text file with a .lic extension and even can be opened by notepad or any text editor:

    8.png

     

     

    3- use the cisco cli to install and manage licenses

     

     

    Licenses Commands Overview :

     

     

    Displaying Licenses types and status

     

    Router#show license all

    10.png

     

     

    R1#sh license detail   will give you similar information like above one too

     

     

     

    Displaying brief summary  about each feature and  installation status

     

    R1#show license feature

    11.png

     

    Installing Evaluation License for feature set  (technology-package)

     

    Let’s say we want to take the benefit of using   securityk9  Feature set in Evaluation  period to set our router as IOS firewall , we will type the following command

     

    Router(config)#license boot module c2900 technology-package securityk9

     

    Then we will asked to type Yes To accept the Evaluation License agreement

     

     

     

    Installing Permanent License for feature set  (technology-package):

     

    After doing the steps we talk about earlier to get the license file , we will copy it to our router flash then type the following command :

     

    R1# license install flash0:uck9-2900-SPE150_K9-FHH12250057.xml

     

    R1# reload

     

     

     

    Backing up the License command :

     

    R1# license save flash:all_licenses.lic

     

     

     

    Uninstalling the License command (two steps required for uninstalling licenses ) :

     

    1-      First we disable it

     

    Router(config)# license boot module c3900 technology-package uck9 disable

     

    Router(config)# exit

     

    Router# reload

     

    2-      Then we clear it

     

    Router#license clear uck9

     

    Router#config t

     

    Router(config)#no license boot module c3900 technology uck9 disable

     

    Router(config)#exit

     

    Router#reload

     

     

     

    Note : some licenses such as built in licenses cannot be cleared. Only licenses that have been added by

     

    using the license install command are removed. Evaluation licenses are not removed.

     

     

     

    Finally I recommend you to understand the naming format for IOS 15 it self , example:

     

    c2900-universalk9-mz.SPA.151-4.M4.bin

     

    The main point here to undersatnd here is what is M & T?

     

    in brief ,M release stay for 16 month and during this period we could see many release of  T including enhancement and  advance functionality added .

     

     

     

     

    14.jpg

     

    More info :

     

    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps10587/ps10591/ps10621/qa_c67_561940.html

     

     

    More resources about IOS v15 & Licenses :

     

    Cisco’s Integrated Services Routers Generation Two Licensing and Packaging

     

    http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10536_Products_White_Paper.html

     

    Configuring the Cisco IOS Software Activation Feature

     

    http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/csa_commands.html

     

    Tutorial for IOS V15

     

    http://www.cisco.com/assets/prod/ios-nxos/ios_sw_releases_15/index.html

     

    CLM eTutorial :

     

    http://www.cisco.com/assets/prod/netmgtsw/Lic_mgr/index.html

     

    An introduction to Cisco IOS version 15

     

    http://www.ciscozine.com/2010/10/12/an-introduction-to-cisco-ios-version-15/

     

    Yasser Auda

    Certified Cisco Systems Instructor  CCSI #  34215