The purpose of routing protocols is to learn of available routes that exist on the enterprise network, build routing tables and make routing decisions. Some of the most common routing protocols include RIP, IGRP, EIGRP, OSPF, IS-IS and BGP. There are two primary routing protocol types although many different routing protocols defined with those two types. Link state and distance vector protocols comprise the primary types. Distance vector protocols advertise their routing table to all directly connected neighbors at regular frequent intervals using a lot of bandwidth and are slow to converge. When a route becomes unavailable, all router tables must be updated with that new information. The problem is with each router having to advertise that new information to its neighbors, it takes a long time for all routers to have a current accurate view of the network. Distance vector protocols use fixed length subnet masks which aren't scalable. Link state protocols advertise routing updates only when they occur which uses bandwidth more effectively. Routers don't advertise the routing table which makes convergence faster. The routing protocol will flood the network with link state advertisements to all neighbor routers per area in an attempt to converge the network with new route information. The incremental change is all that is advertised to all routers as a multicast LSA update. They use variable length subnet masks, which are scalable and use addressing more efficiently.